Garment; Delay Start; My Cycle - Samsung WF395BTPASU/A1-00 Manual De Usuario

Deactivating the Child Lock function
Pressand hold both the Spin and Soil Level buttons simultaneouslyfor approximately 6 seconds.
* When you deactivate the Child Lock function, the door is unlocked and the "Child Lock 6" is turned off.
Z_ * The Child Lock function prevents children or the infirmfrom accidently operatingthe washer and
....... injuring themselves.
* If a child entersthe washing machine, the child may become trapped and suffocate.
* Once you haveactivated the Child Lock function, it continues working even if the power is turned
off.
* Openingthe door by force can result in injury due to damage to the product.
_To add laundryafter you have activated the Child Lock function, you must first pause or deactivate the
....... Child Lock function.
_lf want to the door of the machinewhen the Child Lock function is activated:
you open
washing
* Pause or deactivatethe Child Lock function.
* Turnthe washing machineoff and then on again.
Garment+ _++
You can add or take out laundry items even after the wash has started, as long as the
"Garment+_++" light is on. Pushing the Start/Pause button unlocks the door, unless the water is
too hot or if there is too much water in your washer. If you are able to unlock the door and wish
to continue the wash cycle, close the door, and then press the Start/Pause button.
Delay Start
You can set the washing machineto start your wash automaticallyat a latertime, choosing a delay time.
The hour displayed indicatesthe time at which the wash will be started.
1. Set your wash course.
2. Pressthe Belay Start button repeatedly until the delay time is set.
3. Pressthe Start/Pause button. The "Delay Start '_,_" i ndicator will be lit, and the clock will begin
counting down until it reachesthe set time.
4. Tocancel a DelayStart function, pressthe Power button and then turn the washing machineon again.
My Cycle
Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one-button
convenience. By pushing the My Cycle button, you activate the settings used during the My
Cycle mode. The "My Cycle" light goes on, indicating activation. You can select all options as
follows in "My Cycle" mode.
1. Press the My Cycle button on the Control Panel.
2. Select the cycle using the Cycle Selector dial.
3. After cycle selection, set each option.
See page 37 for available option settings with each cycle.
4. Start "My Cycle" by pushing the Start/Pause button in "My Cycle" mode.
The washer will display the cycle and options you selected the next time you choose "My
Cycle".
You can change the "My Cycle" settings by repeating the process above.
The washer displays the last settings used the next time you choose "My Cycle".
To program "My Cycle" settings into your washer, the washer needs to complete an entire
wash cycle. If for any reason the wash cycle is interrupted and the washer does not finish
the cycle, it will not program in the settings for later use.
24 Wash n9 a cad of aundry
\VF395BTPA 03145B I)6 EN indd 24 2014-2 24 11:52:39