Continuous Drainage; Water Tube Drainage - Nemaxx BT25 Instrucciones De Uso Originales

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 58
KEN001BT25

CONTINUOUS DRAINAGE

You will need the following items:
● A soft hose from device to reservoir with hose inner diameter 10mm (purchase
according to your demand).
● Screwdriver
3. Install the draining hose.
Connect the draining hose
to the outlet, and clamp
it firmly.
NOTE
● Check the installation of draining hose
It may wet furniture if there is a leak.
● Check drainage condition and check if the hose is bent.
● Check if water freezes in the hose.
It may leak if the water freezes up and blocks the hose.
About setting
If temperature is different between water inside the draining hose and outside, the water on
surface of the hose will condense.
In this case, please stop the device accordingly.
1. Remove the bucket.
EN
2. Pull out the bucket stopper.
Tear the drainage holes with
screwdriver or other tools.
4. Put the bucket back to the device.
10
Version: 5.0
28.08.2017

Publicidad

Tabla de contenido
loading

Productos relacionados para Nemaxx BT25

Tabla de contenido