Warnings And Alarms - Invacare SOLO 2 Serie Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 273
SECTION 8—TROUBLESHOOTING GUIDE

Warnings and Alarms

NOTE: In all cases, pressing and holding the On/Off button for 2‐3 seconds will 
turn off and reset the unit.
LCD DISPLAY:
DESCRIPTION:
(Only possible with Pulse Mode)
Transportable oxygen concentrator has
not detected a breath for a predetermined
time period.
ACKNOWLEDGEMENT REQUIRED:
Press Return / Highlight button. Display will either show additional warnings / alarms or
revert to normal operating screens. This warning will be turned off for a minimum of 5
minutes.
LCD DISPLAY:
DESCRIPTION:
(Only possible with Pulse Mode)
Your breathing rate has begun to exceed
the capacity of the transportable oxygen
concentrator.
ACKNOWLEDGEMENT REQUIRED:
A sufficient reduction of your breath rate will automatically turn off the warning.
Alternately, press Return / Highlight button. Display will either show additional
warnings / alarms or revert to normal operating screens. This warning will be turned off
for a minimum of 5 minutes.
Invacare SOLO
2
INDICATORS:
Triple audible beep every 10 sec
YELLOW indicator Flashing.
SOLUTIONS:
1. Verify the cannula is connected, not
kinked, properly positioned and you are
breathing through your nose.
INDICATORS:
Single audible beep every 15 sec
YELLOW indicator On.
SOLUTIONS:
1. Immediately reduce your activity level to
get your breath rate to slow down.
2. Temporarily switch to Continuous Flow
Mode.
36
Part No 1163190

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Solo tpo100Solo tpo100bSolo 2Tpo100Tpo100b

Tabla de contenido