Publicidad
Idiomas disponibles
Idiomas disponibles
Care and
deaning
ElectricShock
Hazard
Disconnect
power
to _ef_igerator
before deaningo
After cleaning,
reconnect
powers
Failure to do so can result in death
or injury to persons°
1
Remove all food and turn the refrigerator
OFF.
2
Disconnect
power tothe
refrigerator.
s
Clean the walls, floor, ceiling of cabinet interior, drawers, shelves and gaskets according
to the
instructions
{see page 32).
4
Dilute mild detergent
and brush solution
into crevices using a plastic bristle brush. Leave for five
minutes. Rinse surfaces with warm water. Dry surfaces with a soft, clean cloth.
5
Wash and dry all bottles, containers
and iars. Discard spoiled or expired items.
6
Wrap or store odor-causing
foods in tightly
sealed containers
to prevent recurring
odors.
7
Reconnect
power to refrigerator
and return food to refrigerator.
8
Allowthe
refrigerator
to cook
9
After 24 hours, check if odor has been eliminated.
lo
If the odor is still present, liquid may have spilled down into the evaporator
tray. In this instance
a service call may be required (see page 47).
Energy saving tips
There are many simple things that can be done to save energy.
During
installation
Locate refrigerator
in coolest part of room. Avoid areas of direct sunlight, or near heating ducts,
registers, or other heat producing
appliances.
If this is not possible, isolate exterior
by using a
section of cabinet or an added layer of insulation.
Be sure the doors are closing securely by leveling refrigerator.
During
Use
Avoid overcrowding
shelves, as this reduces airflow.
Do not use anything
(such aluminium
foil, wax paper, or paper toweling)
as a shelf liner, as this
reduces air flow.
Avoid adding too much warm food all at once, as this reduces cooling
power.
Your refrigerator
is most efficient
when two thirds f@l.
Organize
items in refrigerator
to reduce the time that the door is open.
Maintenance
Clean door gaskets every three months (see page 32).
Clean condenser coils (see page 32).
Publicidad
