Sime Dewy Equipe P Box Serie Manual Del Operador página 77

"DEWY EQUIPE P100 BOX"
SINGLE MODULE MALFUNCTIONS
– Ignition lock (fig. 3)
If the burner does not light the red led ( )
turns on. To attempt ignition again, rotate
the selector knob to ( ) and release it
immediately after returning it to winter
operations ( ).
If it locks again, request an authorised
service control.
– Insufficient water pressure (fig. 4)
If the "0.5 bar" red light blinks, the
module does not work. To restore opera-
tions, fill the system until the green "1
bar" led turns on. If all leds are of f,
request an authorised service call.
– Safety/exhaust thermostat
triggered (fig. 5)
If the safety/exhaust thermostat trig-
gers the red "35°C" led blinks.
To attempt ignition again, rotate the
selector knob to ( ) and release it imme-
diately after returning it to winter opera-
tions ( ).
If it locks again, request an authorised
service control.
– Other faults (fig. 6)
When one of the red "40÷80°C" leds
blinks, turn off the generator and attempt
ignition again.
This operation can be repeated 2-3 times
at most, in the event of failure, request an
authorised service call
SPIA ROSSA
RED LIGHT
BLINKING RED LIGHT SPIA ROSSA INTERMITTENTE
IN CONDIZIONE DI SICUREZZA
IN SAFETY CONDITIONS
GREEN LIGHT SPIA VERDE IN CONDIZIONE
DI FUNZIONAMENTO
IN OPERATING CONDITIONS
SPIA ROSSA INTERMITTENTE BLINKING RED LIGHT
SPIA ROSSA INTERMITTENTE
BLINKING RED LIGHT
IT
ES
GB
Fig. 3
Fig. 4
Fig. 5
Fig. 6
77