Hitachi Koki DH 24PM Manual De Instrucciones E Instrucciones De Seguridad página 9

NOTE:
When using tools such as bull points, drill
bits, etc., make sure to use the genuine
parts designated by our company.
(1) Clean the shank portion of the drill bit.
(2) Insert the drill bit in a twisting manner
into the tool holder until it latches
itself. (Fig. 2)
(3) Check the latching by pulling on the drill
bit.
(4) To remove the drill bit, fully pull the grip
in the direction of the arrow and pull out
the drill bit. (Fig. 3)
7. Installation of dust cup or dust
collector (B) (Optional accessories)
(Fig. 4, Fig. 5)
When using a rotary hammer for upward
drilling operations attach a dust cup or
dust collector (B) to collect dust or
particles for easy operation.
Installing the dust cup
Use the dust cup by attaching to the drill
bit a shown in Fig. 4.
When using a bit which has big diameter,
enlarge the center hole of the dust cup
with this rotary hammer.
English
9