Cleaning And Care - Silvercrest SWKE 2200 A1 Instrucciones De Uso

4) First close the lid, then place the kettle on the base 4, so that it sits securely
on the base 4.
5) Now insert the plug into the mains power socket.
6) Press the ON/OFF switch 3 downwards (I) so that it clicks in.
7) The control lamp in the ON/OFF switch 3 indicates that the appliance is
now heating up.
8) As soon as the water is boiling, the appliance will switch itself off , the
ON/OFF switch 3 clicks upwards and the light goes out.
INFORMATION
► This appliance is fi tted with an overheating protector: if the appliance is
switched on accidentally, without any water in the kettle, the appliance
automatically switches itself off .
If, for example due to a non-closed lid the appliance boils dry, the appliance
switches off automatically.
In such cases fi rst allow the appliance to cool down before using it again.

Cleaning and Care

RISK - ELECTRICAL SHOCK!
► Before cleaning, ALWAYS remove the plug from the mains power socket!
There is the risk of receiving an electric shock!
► Do not open any part of the housing. There are no user-serviceable ele-
ments inside. An open housing will create the risk of a potentially fatal
electrical shock.
NEVER submerse the appliance in water or other liquids! You could
receive a fatal electric shock if residual liquids come into contact with
live components during operation.
WARNING - RISK OF INJURY!
► Let the appliance cool suffi ciently before cleaning it. Risk of Burns!
WARNING - PROPERTY DAMAGE!
► Do not use abrasive or aggressive cleaning materials. These could attack
the upper surfaces and irreparably damage the appliance.
■ Clean the exterior surfaces and the power cable with a slightly damp cloth.
Be sure to dry the appliance well before taking it back into use. For stubborn
soiling use a mild detergent on the cloth. Ensure that there are no detergent
residues in and on the appliance before it is taken back into use.
■
44 │ GB│MT SWKE 2200 A1