Before Use; Filling With Water - SOLAC CE4552 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
ENGLISH
DESCRIPTION
A
Water Tank Lid
B
Water tank
C
Hot plate for warming cups
D
Touch Screen
E1 Short Coffee Icon
E2 Long Coffee Icon
E3 Steam Icon
F
ON/OFF Icon
G Steamer pipe
H
Filter holder
I
Measuring spoon
J
1 cup coffee filter (ground and POD)
K
2 cups coffee filter
L
Supply cable
M Drip tray
N
Drip tray grid
O Steam/Water Knob
P
Silicone Tubes
R
Water Tank Level
USE AND CARE:
Fully unroll the appliance's power cable before
each use.
Do not use the appliance if its accessories are
not properly fitted.
Do not switch the appliance on without water.
Do not use the appliance if the on/off switch
does not work.
Do not move the appliance while in use.
Respect the MAX and MIN levels.
Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
Unplug the appliance from the mains before
refilling the water tank.
Store this appliance out of reach of children
and/or persons with physical, sensory or re-
duced mental or lack of experience and knowl-
edge.
Do not store the appliance if it is still hot.
Only use water with the appliance.
The use of bottled mineral water adapted for
human consumption is recommended.
Never leave the appliance connected and un-
attended if is not in use. This saves energy and
prolongs the life of the appliance.
Do not remove the filterholder when coffee is
being made, as at that time it is under pres-
sure.
INSTRUCTIONS FOR USE

BEFORE USE:

Make sure that all the product's packaging has
been removed.
Before using this product for the first time, it is
advisable to test it only with water.
Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
Before connecting the machine, check that
Steam/Water Knob (O) is closed (turning
clockwise).

FILLING WITH WATER:

The tank must be filled with water before turn-
ing the appliance on.
The tank (B) can be removed via the back of
the coffee maker or open the lid (A) and pour
the water in directly.
Fill the tank taking care to observe the MAX
level. Do not leave the water beneath MIN lev-
el.
Replace the tank in its housing, ensuring that it
is well fitted and be sure siicone tubes (P) are
well introduced in water tank.
BEFORE FIRST USE (PRIMING THE
CIRCUIT):
This simple operation ensures optimum dis-
pensing and must be carried out:
When first starting.
When the machine has been out of use for a
long time (1 or 2 weeks).
When the tank has run out of water.
Fill the receptacle taking care to observe the
MAX level .
Connect the appliance to the mains.
Push over the ON/OFF icon (F). The (E1 and
E2) pilots light will come flashing on and stop
flashing when it's reached the right tempera-
ture.
IMPORTANT: For the first startup, and in gen-
eral for this operation, it is not necessary to
wait for the machine to be hot.
Without fitting the filter holder (H) (or with the
filter holder fitted, but without coffee), place a
recipient under the steamer tube outlet.
Open the Steam/Water knob (O) anticlockwise.
Push over any of two coffee icons (E1 or E2).
to pump a small amount of water.
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido