Salt Table For Common Non-Polygroup Pools & Salt Calculation Formual For All Pools; Pool Volume Calculation & Setup Instructions & Flow Sensor Cleaning - Polygroup SUMMER WAVES Manual Del Usuario

SALT TABLE FOR COMMON NON-POLYGROUP POOLS
Water Capacity
(80% for Quick Set Pool,
90% for Frame Pool)
Gals
2000
4000
6000
8000
10000
12000
14000
SALT CALCULATION FORMULA FOR ALL POOLS
Salt Needed For Start Up (Lbs)
Water Capacity (Gal) x 0.025
Pools Type
Rectangular
Circular
Oval
IMPORTANT:
THE SALT WATER SYSTEM REQUIRES A SEPARATE FILTER PUMP 600-4000 GPH (2271-15140 LPH) TO DRIVE THE
WATER AND FUNCTION PROPERLY. THE SALT WATER SYSTEM MUST BE INSTALLLED AS THE LAST PIECE OF POOL EQUIPMENT
IN THE WATER RETURN LINE TO THE POOL AS DISPLAYED IN DIAGRAM.
1. Assemble the above ground pool and its filter pump according to their installation instruction manual.
2. Take the salt water system and its accessories out of the package.
3. Place the salt water system in line after the filter pump as shown on FIG.1.
4. Connect the electrolytic cell unit inlet
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8 AM to 5 PM Mon. thru Fri.
12
Salt Needed For Start
up 3.0g/L (3000ppm)
Liters Lbs
7500 50
15000 100
22500 150
30000 200
37500 250
45500 300
53000 350
Salt Needed For Start Up (Kgs)
Water Capacity (Lite) x 0.003
POOL VOLUME CALCULATION
Gallons (size in feet)
Length x Width x Depth x 7.5
Length x Width x Depth x 5.9
Length x Width x Depth x 6
SETUP INSTRUCTIONS
16 to filter pump section:
MST. Extended operating days and hours during peak season requirements.
KGs Lbs
23 13
45 26
68 40
90 53
113 66
137 79
159 92
Salt Needed When Low
Salt Detected (Lbs)
Water Capacity (Gal) x 0.0067
Cubic Meters (size in meters)
Length x Width x Depth x 0.79
Length x Width x Depth x 0.8
Salt Needed When
Low Salt Detected
KGs
0.45
12
18
24
30
36
42
Salt Needed When Low
Salt Detected (Kgs)
Water Capacity (Lite) x 0.0008
Length x Width x Depth