Electrolytic Cell Replacement - Polygroup SUMMER WAVES Manual Del Usuario

ELECTROLYTIC CELL REPLACEMENT

IMPORTANT:
ELECTROLYTIC CELL HAS A SELF CLEANING FUNCTION INCORPORATED INTO THE ELECTRONIC CONTROL PROGRAM. THE
SYSTEM AUTOMATICALLY CHECKS OPERATIONAL EFFICIENCY. IF THE SYSTEM INDICATES POOR CELL CONDITION CHECK FOR POOL WATER
QUALITY FIRST. IF "CELL STATUS" IS STILL ON, THEN REPLACE THE CELL.
1. If the pool is filled with water, unscrew the strainer grids from the strainer connector and insert the black hat like plugs into the connectors, before installing the salt
water system.
2. Unplug the power cord.
3. Detach inlet hose end 13 and outlet hose end
4. Unscrew the cell cover nut 26
26
25
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8 AM to 5 PM Mon. thru Fri.
18
24 .
24
to open, and remove cell bottom case
MST. Extended operating days and hours during peak season requirements.
13
5. Take out the old electrolytic cell set
25 .
21 and disconnect all connector cords.
21