Maintenance; Battery Replacement - Amprobe AT-6010-EUR Manual De Usuario

5. MAINTENANCE

5.1 Battery Replacement

Changing the Transmitter Batteries
The battery compartment on the back of the Transmitter is designed to make it easy for the user
to change the battery. A screw is added to secure the battery in case the unit is dropped. Use
eight (8) AA 1.5V alkaline batteries.
Note: Batteries do not come pre-installed in the Transmitter.
1. Make sure that the Transmitter is turned off and disconnected from the circuit.
2. Use a star screw driver to unscrew the battery compartment screws.
3. Remove the battery cover.
4. Install batteries.
5. Replace the battery cover and secure it with the screws.
Figure 5.1a: Changing the Transmitter batteries
8 x AA batteries
22