Setup Menu List - Yamaha YRS-1100 Manual De Instrucciones

Setup menu list

Category Menu
MEMORY LOAD
SAVE
AUTO SETUP BEAM+SOUND
OPTIMIZE
BEAM OPTIMIZE
ONLY
SOUND OPTIMIZE
ONLY
MANUAL SETUP SETTING
PARAMETERS
BEAM
ADJUSTMENT
IMAGE
LOCATION
SOUND SETUP TONE CONTROL
SUBWOOFER
AUDIO DELAY
Dynamic Range
Control
CHANNEL LEVEL
SOUND OUT
INPUT MENU INPUT
ASSIGNMENT
INPUT RENAME
HDMI SETUP
DISPLAY MENU F. DISPLAY SETUP
OSD SETUP
LANGUAGE
SETUP
UNIT SETUP
Sub menu
Memory 1, Memory 2, Loads the beam and sound settings saved in the
Memory 3 memory.
Memory 1, Memory 2, Saves the current beam and sound settings to the
Memory 3 memory.
AUTO SETUP Optimizes the beam and sound settings automatically.
Optimizes the beam settings automatically.
Optimizes the sound settings automatically.
INSTALLED POSITION, Adjusts the listening room and listening position
listening room settings, settings.
distance settings
HORIZONTAL ANGLE, Adjusts the various sound beam settings.
BEAM TRAVEL
LENGTH, FOCAL
LENGTH (Front L, Front
R, Center, Surround L,
Surround R)
LEFT, RIGHT Adjusts the sound position of the front right and left
channels.
TREBLE, BASS Adjusts the output level of high-frequency or
low-frequency sound.
LFE LEVEL Configures the subwoofer settings.
AUTO LIP SYNC Adjusts delay in output timing between video signals
and audio signals.
TV, HDMI1-3, Adjusts output timing of audio signals manually.
INPUT1, INPUT2,
INPUT3
Adaptive DRC, Dolby/ Adjusts the dynamic range.
DTS DRC
Front L, Front R, Center, Adjusts the volume of each channel.
Surround L, Surround R,
Subwoofer
CHANNEL OUT Configures the sound beam output settings.
SURROUND Configures the surround audio signal output settings.
OPTICAL1, OPTICAL2, Assigns jacks according to the component to be used.
COAXIAL, ANALOG
AUDIO SELECT Configures the sound output from HDMI jack
(HDMI1, HDMI2,
HDMI3)
TV, INPUT1, INPUT2, Renames the displayed input source.
INPUT3, HDMI1,
HDMI2, HDMI3
HDMI CONTROL, Configures the HDMI settings.
SUPPORT AUDIO
STANDARD DIMMER, Configures the front panel display settings.
AUTO DIMMER
OSD SHIFT, OSD BACK Configures the OSD settings.
COLOR
ENGLISH, DEUTSCH, Changes the language used in the OSD.
FRANÇAIS, ESPAÑOL,
ITALIANO,
NEDERLANDS,
РУССКИЙ, SVENSKA
METERS, FEET Changes the display unit of measurement.
Setup menu
Features Page
☞p. 17
☞p. 16
☞p. 14
☞p. 14
☞p. 14
☞p. 34
☞p. 35
☞p. 36
☞p. 36
☞p. 36
☞p. 36
☞p. 36
☞p. 37
☞p. 37
☞p. 37
☞p. 37
☞p. 38
☞p. 38
☞p. 39
☞p. 39
☞p. 40
☞p. 40
☞p. 40
☞p. 40
33
En