Advanced Setup - Yamaha YRS-1100 Manual De Instrucciones

Advanced setup

1
Press key to turn this unit to
standby mode.
2
While holding down INPUT key on the front
panel, press
control to turn on the power.
"ADVANCED SETUP" appears in the front panel
display.
3
Release INPUT key on the front panel.
Menu
TURN ON VOLUME
MAX VOLUME SET
PANEL INP. KEY
F.PANEL. KEY
R.INPUT POWER
AC ON STANDBY
MEMORY PROTECT
DEMO MODE
FACTORY PRESET
y
1)
To return to the previous menu, press
y
2)
The default settings are marked with "*".
key on the remote
Description
Sets volume level at power-on.
Sets maximum volume.
Enables/disables the INPUT key on the front panel.
Enables/disables the keys on the front panel.
Enables/disables power-on by remote control input
keys when the unit is in standby mode.
Sets whether or not this unit returns to its previous
state when AC power is restored after a temporary
power loss.
Prohibits saving of the settings by using the memory
setting function (☞p. 16).
3)
Demonstrates sound beam.
Resets all settings to their default values, except
settings in ADVANCED SETUP.
RETURN key.
4
Press /
menu on the front panel display and then
press ENTER key.
5
Change setting by pressing
6
Press key to set this unit to the
standby mode.
The new setting will be reflected when you turn on the
unit by pressing
Selectable item/ Adjustable range
Off* (Not set), 01 to 99, MAX (Maximum)
01 to 99, MAX* (Maximum)
P.INPUT: ON* (Enabled), P.INPUT:OFF (Disabled)
P.INPUT: ON* (Enabled), P.INPUT:OFF (Disabled)
R.INPUT PW: OFF* (Disables power-on),
R.INPUT PW: ON (Enables power-on)
AC STANDBY: OFF* (Restores the state before
power was lost),
AC STANDBY: ON (Enters standby mode)
PROTECT:OFF* (Protect is not performed),
PROTECT:ON (Protect is performed)
BEAM DEMO:OFF* (Normal playback),
BEAM DEMO:ON (Demo mode)
PRST:CANCEL* (Reset is not performed),
PRST: RESET (Reset is performed)
y
3)
This unit outputs sound beam down-mixed to 1 channel moving
horizontally to right and left. By this function, you can feel how sound
beam is output from this unit.
"Demo" appears in the front panel display while setting demo mode.
Start/stop moving horizontally
Press Off key.
Auto Demo On: Sound beam automatically moves horizontally to right
and left
Auto Demo Off: The direction of sound beam is fixed
Adjust the angle of sound beam manually
Press SURROUND/ STEREO key in the state of "Auto Demo
Off"
to select the desired
1)
/ key.
key.
41
2)
En