Storage And Maintenance; Handle Assembly - Sunbeam 4804 Manual De Instrucciones

A short power-supply cord is provided to reduce the risk resulting from becoming
entangled in or tripping over a longer cord. An extension cord may be used with caution.
If an extension cord is used, the marked electrical rating of the cord must be at least
as great as the electrical rating of the appliance. The extension cord should be arranged
so that it will not drape over the countertop or table top where it can be pulled on by
children or tripped over unintentionally.
W
– To reduce the risk of electric shock, this appliance has a polarized plug
ARNING
(one blade is wider than the other). This plug will fit in a polarized outlet
only one way. If the plug does not fully fit into the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician to install the proper outlet.
Do not change the plug in any way.
Allow appliance to cool before storing. Store Electric Skillet in a dry location, such as
on a table top or countertop, or on a cupboard shelf. Wind the electrical cord into a coil
and secure with a twist fastener.
Other than recommended cleaning, no further user maintenance should be necessary.
Return the Electric Skillet to the Hattiesburg Service Center for servicing and repairs
(See Page 25).
H A
ANDLE SSEMBLY
1. Using the screws provided, position them as illustrated.
2. Tighten screw with appropriate screw driver. DO NOT OVERTIGHTEN.
S M
TORAGE AND AINTENANCE
4