Motor Brushes; Optional Accessories; Protecting The Environment - DeWalt DWP849X Traducido De Las Instrucciones Originales

EN GLI SH
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into a liquid.

Motor Brushes

Carbon brushes should be regularly inspected for
wear.
• Be sure tool is unplugged.
• Unscrew the plastic brush inspection caps (c)
(located in the sides of the motor housing) and
withdraw the spring and brush assemblies from
the tool.
• Keep brushes clean and sliding freely in their
guides.
• When the brushes are worn down to the line
closest to the spring, they must be replaced.

Optional Accessories

WARNING: Since accessories, other
than those offered by D
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only D WALT recommended
E
accessories should be used with this
product.
Use only accessories having a maximum operating
speed at least as high as the highest no-load RPM
marked on the tool's nameplate. This precaution
applies to any accessory on any tool.
Consult your dealer for further information on the
appropriate accessories.

Protecting the Environment

Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your D
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
34
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
D WALT provides a facility for the collection and
E
recycling of D
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
D WALT office at the address indicated in this
E
manual. Alternatively, a list of authorised D
repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com.
WALT, have
E
WALT product
E
WALT products once they have
E
E
WALT