Recommended Grip; Installing The Shoulder Strap - Greenlee LRH-144 Manual De Instrucciones

Operation—Power Tool (cont'd)
Battery Low Warning Lamp (3)
Off Flashing (no charge)
(normal operation) Battery protection feature active.
Excessive (complete) discharging of lithium-ion
batteries shortens their service life dramatically. The
driver includes a battery protection feature designed to
prevent excessive discharging of the battery pack.
The battery protection feature activates immediately
before the battery loses its charge, causing the battery
low warning lamp to flash
If you notice the battery low warning lamp flashing,
charge the battery pack immediately.

Recommended Grip

Use the grip to hold and operate the driver with one
hand. If the job requires additional force, push against
the rear end of the driver with your other hand.

Installing the Shoulder Strap

• Install the shoulder strap firmly to the main unit of
the tool. Check the length of the strap before use.
• Check the condition of the strap and do not use if
it is cut or torn.
• Wear the shoulder strap securely on the shoulder.
Failure to observe these precautions may result in
injury or property damage.
1. Pass the strap through the strap holders (1).
2. Pass the strap through the buckles and adjust the
length (2).
Shoulder pad
• The shoulder strap can be adjusted according
to the individual.
• Adjust the shoulder pad to the shoulder.
• Pull the shoulder strap to make sure it is firmly
attached to the main unit of the tool.
14