Nitial Settings; Plug & Play - JVC HR-J4006UM Manual De Instrucciones

6
EN
Plug & Play
Before starting...
Connect the TV antenna cable to the ANT. IN jack on the
VCR and plug the power cord into the AC outlet.
Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
••
3
OK
1
POWER
1 2 3
2
4 5 6
7 8 9
0
4
CH
••
PUSH JOG
The Plug & Play function simplifies installation by guiding you
through the procedures of setting the language, clock and tuner
channels — simply follow the on-screen menus that appear
when the POWER button is first pressed to power on the VCR
after you connect the power plug to an AC outlet. The default
setting is "SPANISH".
IMPORTANT
Don't press any buttons on the VCR or remote that are
not directly related to the step you are performing while
Plug & Play is in progress.
If you perform Plug & Play successfully during
installation, there's no need to separately perform the
Language Select, Clock Set or Channel Set procedures,
but if adjustments become necessary they can be
performed as follows:
– To change the selected language
– To reset or adjust the time
– To add/delete channels manually
– To reset the tuner after moving to a different location
pg. 10
PERFORM PLUG & PLAY
SETUP
1
Press POWER.
The Language Select screen appears.
SELECT LANGUAGE
2
Press CH5 ∞ or PUSH
JOG % fi to move the
highlight bar (arrow) to
your desired language
(ENGLISH or ESPAÑOL),
then press OK or PUSH
JOG .
The Clock Set screen
appears.
SET TIME
3
Press CH5∞ or PUSH
JOG % fi to set the hour,
then press OK or PUSH
JOG .
Press and hold either
button to delay or
advance the time by 30
minutes.
SET DATE
4
Press CH 5 ∞ or PUSH JOG % fi to set the date, then
press OK or PUSH JOG
Press and hold either button to change the date by 15
days.
SET YEAR
5
Press CH 5 ∞ or PUSH JOG % fi to set the year.
INITIAL SETTINGS
pg. 8
pg. 9
pg. 11
LANGUAGE SELECT
= ENGLISH
ESPAÑOL
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
CLOCK SET
TIME DATE YEAR
– –:– –AM 1/ 1
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
.
99