To Connect To A Stereo Audio Amplifier/Receiver - JVC XV-N5SL Manual De Instrucciones

Connection to a TV equipped with component jacks
You can enjoy high picture quality by connecting the unit's COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN
jacks of your TV with the video cables.
Green
Red White
• Connect "Y" to "Y," "P " to "P
B
Selecting color system
The unit is compatible with the PAL and NTSC systems. Set the PAL/NTSC switch on the rear panel to match the color
system of your TV. Make sure that the color system of a DVD VIDEO/video CD/SVCD disc labeled on the package matches
your TV. However, note that you must change the switch position while the unit power is off (on standby) with the DVD
removed. Otherwise, the changed setting is not effective.
If you use a multi-color system TV, you can play discs recorded on both PAL and NTSC systems by setting the PAL/NTSC
switch appropriately.
Note that you must change the switch position while the unit power is off. Otherwise, the changed setting is not effective.
l

To connect to a stereo audio amplifier/receiver

You can enjoy high-quality audio by connecting the unit's audio output to your amplifier or receiver.
Connect the unit's AUDIO OUT (LEFT/RIGHT) jacks to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio
amplifier or receiver.
The unit
Red White
NOTES
• When using the unit with a stereo amplifier or receiver, set "ANALOG DOWN MIX" in the "AUDIO" preferences to "STEREO"
(see page 52).
• If your stereo amplifier or receiver has an AV COMPU LINK terminal, you can use the AV COMPU LINK function. See "AV
COMPU LINK remote control system" on page 59 for details.
Blue
Component video cable (not supplied)
Red
Audio cable (not supplied)
"(C ), "P " to "P "(C ) correctly.
B B R R R
Audio cable (not supplied)
Blue
Green
TV
Y
IN
S-VIDEO
COMPONENT IN
VIDEO
White
LEFT
AUDIO
RIGHT
Red
Amplifier or receiver
White
IN
LEFT
AUDIO
RIGHT
Red
Getting started
English
Red
P P
B R
7