Resuming Playback; To Memorize The Interrupt Position - JVC XV-N5SL Manual De Instrucciones

Basic operations

Resuming playback

The unit can remember the position on a disc where you interrupt playback, and resume playback from that position later.
You can set two resume modes (DISC RESUME and ON) using the preference display. See page 53 for details about how
to set the resume mode.
• The resume mode is initially set to "ON" when you purchased.
• You can deactivate the resume mode by setting "RESUME" on the "OTHERS" preference display to "OFF ."
TV
STANDBY/ON
OPEN/
TV
CLOSE
OPEN/CLOSE
TV1 TV2
1 2
TV4 TV5
4 5
TV7 TV8
7 8
TV-/-- TV0 MUTING
10 0
TITLE/ TV/VIDEO
RETURN SUBTITLE GROUP
CH
+
VOL-
ENTER
CH
-
PREVIOUS NEXT
CLEAR SELECT STROBE
7
SLOW- SLOW+
.

To memorize the interrupt position

¶ During playback
When the resume mode is set to "DISC RESUME"
Press 7
.
The unit stops playback and memorizes the interrupt position. After pressing 7, the display window on the front
panel shows "RESUME STOP ."
In this condition, the memory of the interrupt position is not cleared if you press 0 to open the disc tray, or press
STANDBY/ON (on the front panel) or DVD STANDBY/ON
• The interrupt position is also remembered when you press
the remote control unit). In this case, "RESUME STOP" is not shown on the display window.
• To clear the memory, press 7 while the disc stopped.
• The unit remembers interrupt positions for the last 30 discs played.
• If you interrupt the playback of a disc for which an interrupt position has already been stored, the memory will be updated with the
new interrupt position.
• After the unit has stored interrupt positions for 30 discs, storing a new interrupt position will cause the unit to delete the oldest
stored position. Interrupting playback of a disc for which an interrupt position is already stored may change the order in which the
positions are stored. This may potentially change the order in which positions are deleted.
When the resume mode is set to "ON"
Press 7
.
The unit stops playback and memorizes the interrupt position.
In this condition, the memory of the interrupt position is not cleared if you press STANDBY/ON
panel) or DVD STANDBY/ON
Note that if you press 0 to open the disc tray, the memory of the interrupt position is cleared.
• The interrupt position is also stored by pressing STANDBY/ON
control unit).
• To clear the memory, press 7 while the disc stopped.
16
DVD
DVD
TV3
3
TV6
6
TV9
9
+10
CANCEL
VOL+
3
(on the remote control unit) to turn off the unit.
XV-N5 DVD/SUPER VCD/VCD/CD PLAYER
Disc tray
(on the remote control unit) to turn off the unit.
0
, STANDBY/ON (on the front panel) or DVD STANDBY/ON
(on the front panel) or DVD STANDBY/ON
7 3 0
Available :
(on
(on the front
(on the remote