To Adjust The Picture Character [Vfp] - JVC XV-N5SL Manual De Instrucciones

Advanced operations
NOTES
• To return to normal playback.
Press ENTER.
• While zoomed, the picture may look coarse.

To adjust the picture character [VFP]

The VFP (Video Fine Processor) function allows you to
adjust the picture character according to the type of
programming, picture tone or personal preferences.
OPEN/
CLOSE
TV1 TV2
1
TV4 TV5
4
TV7 TV8
7
TV-/-- TV0
10
RETURN SUBTITLE
CH
+
VOL-
ENTER
ENTER
CH
-
PREVIOUS
CLEAR SELECT
SLOW-
REPEAT SUB TITLE
DIGEST ANGLE
3D
PHONIC
RM-SXV010U
REMOTE CONTROL
¶ During playback
1
Press VFP.
The VFP mode selection window appears on the TV
screen.
2
Use 2/3 to select the desired preset.
Each time you press the button, the VFP mode
changes as follows.
Set the video type most suitable to the current
program or the room conditions.
Selected preset
USER 1
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
Y DELAY
Parameter
"NORMAL" is suitable for watching TV in a general
room. "CINEMA" is suitable for watching a movie
software in a room with suppressed light.
They are factory presets and you cannot change
parameters for them.
If you select "USER 1" or "USER 2," you can adjust
parameters that affect the picture character and
store the settings as a user preset. See the next
step.
34
Available :
TV DVD
STANDBY/ON
TV DVD
TV3
2 3
TV6
5 6
TV9
8 9
MUTING
0 +10
TITLE/ TV/VIDEO
GROUP CANCEL
5/∞/2/3
VOL+
NEXT
STROBE
SLOW+
AUDIO VFP
VFP
ZOOM
AMP VOL
NORMAL
+ 4 CINEMA
+ 4
+13
+13
+13
+ 4
+ 2
USER 1
USER 2
3
To define a user setting, select a parameter to
be edited using 5/∞ from the following.
• GAMMA
Controls the brightness of a shaded portion
without changing the brightness of the entire
picture.
This control is optimum when you adjust the
pictures of software which generates subdued
black in a bright room.
The setting range is +4 to –4.
• BRIGHTNESS
Controls the brightness of the screen.
The setting range is +16 to –16.
• CONTRAST
Controls the contrast of the screen.
The setting range is +16 to –16.
• SATURATION
Controls the color depth of the screen.
The setting range is +16 to –16.
• TINT
Controls the tint of the screen.
Use the appearance of a natural skin tone as a
guideline.
The setting range is +16 to –16.
• SHARPNESS
Controls the sharpness of the screen.
The setting range is +3 to 0.
• Y DELAY
Controls the color gap of the screen.
The setting range is +2 to –2.
4
Press ENTER.
A window for setting parameters appears instead
of the VFP mode selection window.
SATURATION
Selected parameter
5
Adjust the level of the parameter using 5/∞.
The higher value enhances the effect.
6
Press ENTER.
The parameter is set and the VFP mode selection
window appears again.
Repeat steps 3 to 6 if you want to set other
parameters.
+ 5 4