General Warnings - ardistel BLACK FIRE hardcore Manual De Instrucciones

functioning or is not working properly, you must update the controller to be compatible
with that new firmware from your PS3™ system.
To do that, visit the website www.ardistel.com and you will be able to download the
controller update matching the firmware version installed in your system. Together with the
update, an instructions manual will be included with the correct steps to update the
EN
controller.
Keep in mind that the update software is only compatible with Windows® XP, Windows®
Vista and Windows® 7 (check the mentioned website regularly for some updates about
compatibility).
Once the controller is updated, please, follow the instructions of section 3 of this manual:
"Controller connection and setup".
*Requires PC computer with Windows® and Internet connection.
9. WARNINGS AND SAFETY MEASURES
In order to make sure that the controller works properly, please follow the instructions
below strictly and do not misuse the product, keeping in mind the following warnings:

9.1. General Warnings

• If you cannot link the controller, turn it off. Just press and hold HOME button on the
controller while you are in the PS3™ main menu, an Options menu will pop up. Select "Turn
Off Controller" and confirm. Connect again the USB cable to the controller and to the
system, and press the HOME button to re-link it again.
• Check that the energy level from the battery pack is enough. A low level may cause
anomalous functioning in the controller.
• Do not throw any of these devices into water, fire or drop them.
• Keep the devices away in a dry and safe place. Do not expose to direct sun light.
• Do not use the device or expose the device/battery pack to high or low temperatures
(extreme hot/cold conditions or high levels of moisture). Not paying attention to this
warning may damage the product and/or the battery pack.
• Keep the controller and its components in a safe and clean place. Quick oscillations or
dropping the controller into hard surfaces may damage the device and/or its components.
• For product general cleaning, take out the battery pack cover off the back of the controller
and remove the battery pack and never use chemical products. Carefully wipe the controller
with a damp & clean cloth. Avoid putting a lot of pressure on the buttons or the surface of
the controller as you may scrape the "Soft touch" coating or damage it.
• Do not let the controller powered on when you are not using it. Just press and hold HOME
button on the controller while you are in the PS3™ main menu, an Options menu will pop
up. Select "Turn Off Controller".
• If you are not going to use the product for a long time turn off the controller and remove
the battery. Keep the battery in a dry and safe place, away from liquids, dust and dirt; do not
expose it to direct sun light, extreme temperatures (heat or cold) or air moisture
fluctuations.
• Use the product properly and following strictly these instructions.
• Do not disassemble or attempt to repair the device or its components. There are no
serviceable parts inside. Changes or modifications not approved by Ardistel will avoid the
user warranty. Only Ardistel qualified personnel can repair or replace the product and its
components.
• Please, keep the device and its components away from children. Children must be ALWAYS
under adult supervision.
13