What To Do If; Installation - Zanussi ZOB22601 Manual De Instrucciones

lation the surface of the glass panel frame on
the screen-printing zones is not rough when
you touch it.
Make sure that you install the internal glass
panel in the seats correctly. Refer to the illustra-
tion.

What to do if...

Warning! Refer to the Safety chapters.
Problem
The appliance does not operate.
The appliance does not operate.
The appliance does not operate.
The oven lamp does not operate.
Steam and condensation collect
on the food and in the oven.
If you cannot find a solution to the problem
yourself, contact your dealer or the service cen-
tre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Installation

Warning! Refer to the Safety chapters.
www.zanussi.com
Possible cause
The appliance is not activated.
The Minute Minder + End of
Cooking programmer is not set.
The fuse in the fuse box is re-
leased.
The oven lamp is defective.
You left the dish in the oven for
too long.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity.
Remedy
Activate the appliance. Refer to
the chapter "Daily Use".
Set the Minute Minder + End of
Cooking programmer. Refer to the
chapter "Clock functions".
Do a check of the fuse. If the fuse
is released more than one time,
contact a qualified electrician.
Replace the oven lamp.
Do not keep the dishes in the
oven for longer than 15 - 20 mi-
nutes after the cooking ends.
.........................................
.........................................
.........................................
13