Device Assembly - Easy Home 1.6.16 Manual Del Usuario

Rechargeable Stick Vac/Hand Vac

DEVICE ASSEMBLY

Assembly:
• Grasp the base (21) of the charger station and insert the
charger holder (22) into the opening intended for this
purpose as shown in the adjoining illustration until you
can hear and feel the holder click into place.
• Now insert the floor nozzle (18) into the end of the upright
vacuum cleaner frame. Make sure that both metal pins
of the floor nozzle are inserted into the openings of the
frame. Press both parts together to the end stop. The parts
must audibly click together. To remove the floor nozzle
(18), press the lock (17) and pull it away from the upright
vacuum cleaner frame.
• Now place the vacuum cleaner upright into the charger
station by inserting it from above as shown in the adjoining
illustration (see illustration E). If you want to remove the
upright vacuum cleaner from the charger station, lift it up
slightly and pull it toward the front.
The basic unit of the upright vacuum cleaner
has a folding handle that allows you to store it
conveniently after use (see illustration C).
NOTICE
• Fold the handle (14) upward until you can hear and feel it
click into place. If you want to fold the handle (14)
down, you first have to press the release button
(15).
Assembly is finished when the handle is folded out.
AFTER SALES SUPPORT
1-800-886-8506
USA
USA
Device assembly
16
hup-service@h-u-p.com