Starting The Appliance - Easy Home 1.6.16 Manual Del Usuario

Rechargeable Stick Vac/Hand Vac
• Secure the hand-held vacuum cleaner in the frame of the upright vacuum
cleaner by first inserting the tip into the opening intended for this purpose
(the suction nozzle (9) must be inserted); then press the top side of the
hand-held vacuum cleaner to the frame until you hear and feel it click into
place (see illustration B).
• Now place the upright vacuum cleaner into the charger station. Make sure
that it is properly inserted, otherwise the unit will not charge.
•
Now connect the charger to the charger station and
holder (22) by inserting the charger plug into the
charger socket on the side of the charger holder (22)
(see illustration D).
• Now plug the charger into a suitable electrical socket. The charging
indicator light (4) will flash indicating that the unit is charging. When the
charging indicator light (4) is continuously illuminated, charging is finished.
Removing the hand-held vacuum cleaner
• To remove the hand-held vacuum cleaner from the
upright vacuum cleaner, press the release button (16).
Tip the top slightly forward and remove the hand-held
vacuum cleaner upwards from the upright vacuum
cleaner.

STARTING THE APPLIANCE

Under no circumstances vacuum up: Toner, plaster, cement,
stone dust, drilling dust, toxic or explosive material, hot
ash, burning cigarettes or matches, sharp objects such
WARNING
as glass splinters or liquids!
Use the appliance only if all filters and the dust bowl are
CAUTION
properly installed.
AFTER SALES SUPPORT
1-800-886-8506
USA
USA
Product use
1
2
18
hup-service@h-u-p.com