GB
3 Operation / 4 Miscellaneous
3.6
Error messages
4.1
Cleaning and
maintenance
16
4. The measurement is complete. Step down from the scales.
5. The display
once again shows – in succession – the measured body
fat, body water and body muscle. Then the scales switch off automa-
tically.
The scale is overloaded.
The battery is low and must be replaced.
Error during measurement.
• Remove the batteries before cleaning the unit.
• Never use aggressive cleaning agents or stiff brushes.
• Clean the scale using a soft cloth lightly moistened with a mild soapy
solution. Never use abrasive cleaning agents or alcohol.
• Do not allow any water to get into the unit. Do not use the unit again
until it is completely dry.
• Remove the batteries from the unit if it will be unused for a longish
period. Otherwise there is a risk that the batteries might leak.
• Do not expose the unit to direct sunlight; protect it against dirt and
moisture.