Preparing The Measurement - Beurer medical BM 27 Manual De Instrucciones

Information on the display:
1
11
10
9
8 7 6
1. Time and date
2. Systolic pressure
3. Diastolic pressure
4. Calculated pulse value
5. Cardiac arrhythmia symbol
6. Memory display: average value ( ), morning (
evening ( ), memory space number
7. Release air
8. User memory
9. Battery replacement symbol
10. Classification of measurements
11. Cuff position control
2
3
4
5
),

4. Preparing the measurement

Inserting the batteries
• Open the battery compartment lid.
• Insert four 1.5V AA (alkaline type
LR6) batteries. Make sure that the
batteries are inserted the correct
way round.
Do not use rechargeable batteries.
• Close the battery compartment lid
again carefully.
• All display elements are briefly dis-
played, 24 h flashes in the display. Now set the date and
time as described below.
If the low battery indicator
you can no longer perform any measurements and must re-
place the batteries. Once the batteries have been removed
from the device, the time must be set again.
Battery disposal
• The empty, completely flat batteries must be disposed of
through specially designated collection boxes, recycling
points or electronics retailers. You are legally required to
dispose of the batteries.
20
is permanently displayed,