Assembly Instructions - GrillMaster 720-0783 Manual Del Usuario

Assembly Instructions

CAUTION: While it is possible for one person to
assemble this grill, obtain assistance from another
person when handling some of the larger, heavier
pieces.
Note: Be sure to slide grease tray out of back of grill
head and remove all packaging from tray.
1. Use the parts list to check that all parts have been
included.
2. Inspect the grill for damage as you assemble it. Do
not assemble or operate the grill if it appears
damaged. If there are damaged or missing parts
when you unpack the shipping box, or you have
questions during the assembly process, please call
1-800-648-5864.
For Assembly Questions, call 1-800-648-5864
8AM – 5 PM EST, Monday through Friday.
1. Assembling Grill Cart
a) Attach four casters to bottom panel (B) using (16)
Truss head screws (AA), (16) Lock washers (EE),
Note: (D) is swivel caster with brake, (E) is swivel
caster, (C) are straight casters. See Fig.1.
Hint: For ease of cast assembly, turn bottom panel
upside down.
b) Loosen screw and washer which is attached to tank
bolt from outside of gas tank tray seat (B1). Remove
bolt from inside and insert the bolt from outside, of
tank tray. Re-attach screw and washer from inside
the tank tray. See Fig.2.
c) Attach assembled gas tank tray to bottom panel (B)
using (4) Truss head screws (CC). See Fig.3.
Fig.1
E
D
C
Fig.2
B1
Fig.3
10
B
C
F