GrillMaster 720-0783 Manual Del Usuario página 16

6. Sear Side Burner Valve Assembly
(a) Remove the side burner igniter. See Fig.22.
Remove two screws at the back of side burner
bowl, see Fig.23, then pull out of side burner. See
Fig.24.
(b) Remove two screws from side burner control
valve face. Insert side burner valve control stem
through hole in side burner control panel. Place
side burner control knob bezel (T) over side
burner valve control stem. Secure bezel to control
panel and valve with 2 screws removed above.
See Fig.25.
(c) Insert side burner over side burner valve orifice.
See Fig.26. Use the two previously removed side
burner screws to reattach side burner to side
burner shelf.
(d) Replace igniter and tighten two screws at the
back of burner.
SIDE BURNER LID OPERATION
Featuring two-step lift and release
side burner lids to avoid lid closing side burner lids to avoid lid closing
unexpectedly.
Instruction: Lift lid straight up before
closing. See below illustration:
Fig.22
Fig.23
Fig.24
Fig.25
T
Fig.26
16