Kroeplin G0 Serie Manual De Instrucciones página 40

Program: TOL Programm: TOL
Afterwards you will return to the SETUP - Menu.
Quitting the SETUP – Menu
2x short
For confirming and saving.
1x long
The instrument returns to the last program used
„ERR 06" in the display could be caused by the following:
• Tolerance limit is out of the acceptable range
• The lower tolerance limit is above the upper tolerance limit
• The upper tolerance limit is below the lower tolerance limit
Activating / Deactivating the tolerance marks
Activating TOL – Program
(Example: MIN+TOL – Program)
1x long
The last selected status will appear in the display / Factory setting: 1
Switch to tolerance range "3"
The tolerance limit appears in the display down right.
2x short
40