Data Logger (d-LOG)
8
For confirming and saving
1x long
Afterwards you will return to the SETUP -
9
Menu.
Quitting the SETUP – Menu
10
3x short
For confirming and saving.
11
The instrument returns to the last program used
1x long
Symbol (16) for „Datakogger" (DL) appears in the
display
Measuring values cannot be saved if the symbol (16) „DL" is blinking (full memory).
The measured values can be printed and read via interfaces.
Shortcut for direct activating and deactivation the d-LOG menu.
Activating "d-LOG" – Menu
+
„d - LOG" will appear in the display
1x simultaneous /
short
The last selected status will appear in the display /
Factory setting: OFF
49