The Automatic Heat Up - AEG HE834080XB Manual De Instrucciones

Automatic Switch Off times
Heat setting
Stops after
Activation and deactivation of the outer rings
You can adjust the surface you cook to the dimension of the cookware.
To activate the outer ring touch the sensor field
For more outer rings touch the same sensor field again. The subsequent indicator comes
on.
Do the procedure again to deactivate the outer ring. The indicator goes out.

The automatic heat up

Automatic heat up function sets the highest heat setting for some time, and then de-
creases to the necessary level. To switch it on turn the cooking zone knob to the right
until you see
11
10
9
8
7
6
5
4
3
2
1
0
1
Timer
Count Down Timer
Use the Count Down Timer to set how long the cooking zone operates for only this one
time.
Set the Count Down Timer after the selection of the cooking zone.
You can set the heat setting before or after you set the timer.
• To set the cooking zone: touch
cooking zone comes on.
• To activate the Count Down Timer: touch
minutes). When the indicator of the cooking zone start to flash slow, the time counts
down.
• To see the remaining time: set the cooking zone with
ing zone starts to quickly. The display shows the remaining time.
• To change the Count Down Timer: set the cooking zone with
, -
6 hours
in the display. After that set the heat setting immediately.
2 2. 3 3. 4 4. 5 5. 6 6. 7
-
5 hours
/
8
again and again until the indicator of a necessary
of the timer to set the time (
Operating instructions
4 hours
/ . The indicator comes on.
. The indicator of the cook-
touch
23
-
1.5 hours
00 99
-
or .