Erasing Messages; Memory Full; Remote Operation - Topcom BUTLER 5750 Manual De Usuario

Go to the next message when you select 'Next' or press the skip forward
button
Go back to the begining of the current message press the skip backwards key
ones, to jump back to the previous message press the backwards key twice.
Pause the message playback by pressing the pause key. Press the pause key
again to continue.
Stop the playback by pressing the Stop-key

10.10 Erasing Messages

During playback of the messages you can erase the message one by one as above descibed. You
can also erase all played messages:
1 Enter the menu.
2 Select "Ans Machine" and confirm.
3 Select "Delete Msgs" and confirm.
4 Confirm again or select back to stop.

10.11 Memory Full

If the memory is full, "MEMORY FULL" will appear on the display. If the answering machine is
turned on and a call comes in, the machine will automatically play OGM 2 (answering machine
function without recorded caller message).
When listening to the messages, the internal voice will say that the memory is full and then play
back the messages.
Erase the messages one by one during listening or all by the menu as above described.

10.12 Remote Operation

The answering machine can only be operated remotely using a tough-tone phone
(DTMF tone selection system).
1 Call your machine.
4 5 6
g h i j k l m n o
The answering machine picks up the line, you hear the outgoing message and
a beep.
2 Slowly dial the VIP code (default 321)
4 5 6
g h i j k l m n o
You will hear two short beeps for confirmation.
3 Enter the next codes to use the desired function:
4 5 6
g h i j k l m n o
Listening to Messages
4 Press '2' to Listen to messages
2
The answering machine will play the messages.
During playback, you have the following options:
5 Press '2' to Pause playback
2
6 Press '2' to Restart playback.
2
Answering machine
22