Precautions For Use - Chauvin Arnoux AmpFlex A100 Manual De Instrucciones

„ Comply with the rated maximum voltage and current and the measurement category.
„ Never exceed the protection limits stated in the specifications.
„ Comply with the conditions of use, that is to say temperature, humidity, altitude, degree of pollution
and location of use.
„ Do not use the instrument if it is open, damaged, or incorrectly reassembled. Before each use, check
the integrity of the insulation on the coil, the leads, and the electronic unit.
„ The application or withdrawal of the sensor on uninsulated conductors at dangerous voltages requires
the use of suitable safety equipment.
„ If it is not possible to power down the installation, follow safe operating procedures and use suitable
means of protection.
„ All troubleshooting and metrological checks must be done by competent, accredited personnel.
1. PRESENTATION ................................................................................................................. 13
1.1. Standard models in a A100 series ........................................................................... 13
1.2. Custom models ........................................................................................................ 13
2. DESCRIPTION .................................................................................................................... 14
3. USE ................................................................................................................................. 14
4. SPECIFICATIONS ............................................................................................................... 15
4.1. Reference conditions ............................................................................................... 15
4.2. Conditions of use ..................................................................................................... 15
4.3. power supply ........................................................................................................... 16
4.4. Measurement parameters ....................................................................................... 16
4.5. Compliance with electrical standards ...................................................................... 17
5. MAINTENANCE .................................................................................................................. 18
5.1. Battery replacement ................................................................................................ 18
5.2. Cleaning .................................................................................................................. 18
5.3. Calibration checking ................................................................................................ 18
5.4. Repair ...................................................................................................................... 18
6. WARRANTY ....................................................................................................................... 19
7. TO ORDER .......................................................................................................................... 19

PRECAUTIONS FOR USE

CONTENTS
12