After-Sales Service And Application Service - Bosch PFS 3000-2 Manual Original

Problem Cause
Spray material dripping at Deposit of spray material on the nozzle cap (9)/
the nozzle cap
(10), the nozzle needle (13) and the air
cap (2)
Nozzle cap (9)/(10) loose
No spray material coming Sliding switch (24) is in position ◯
out of the nozzle cap
No pressure build-up in container (7) due to
container not being completely closed
Suction tube (15) loose
Nozzle needle (13) clogged
Suction tube (15) clogged
Ventilation hole (16) on suction tube (15)
clogged
Container seal (14) missing or damaged
Spray material too viscous
Spray material dirty (lumps of paint)

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Bosch Power Tools
Corrective measure
Clean the nozzle cap, nozzle needle and air cap
Tighten the nozzle cap
Set the sliding switch to "wood" or "wall" applic-
ation
Turn the container (7) towards the close sym-
bol until you hear the lock ring (6) engage
Slide the suction tube all the way onto the paint
channel (17)
Clean nozzle needle
Clean suction tube
Clean the suction tube and the ventilation hole
Slide a (new) container seal over the suction
tube into the groove
Dilute the spray material again and carry out a
test-spray run
Completely empty and clean the spray gun;
pour the spray material through the filling
sieve (11) when filling
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch-pt.com.au
www.bosch-pt.co.nz
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
English | 25
1 609 92A 58D | (28.10.2019)