Product Specifications; Features - Power Stroke PS14120 Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

PRODUCT SPECIFICATIONS

Motor .................................................................................................................................................. 120 V, 60 Hz, 12 Amps
Maximum Pounds Per Square Inch Pressure* ......................................................................................................... 1,600 psi
Maximum Gallons Per Minute* ...................................................................................................................................1.2 gpm
Maximum Inlet Water Temperature ................................................................................................................................104˚F
*Max. rating determined by PWMA Standard 101
KNOW YOUR PRESSURE WASHER
See Figure 3.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
DETERGENT TANK
Remove the cap from the detergent tank to add detergent
to the pressure washer.
GFCI PLUG
The pressure washer is equipped with a GFCI plug to guard
against the hazards of ground fault currents. This plug does
not protect against short circuits, overloads, or shocks.

FEATURES

ON/OFF SWITCH
This switch turns the pressure washer on and off.
TRIGGER HANDLE
The trigger handle has a gripping surface that provides
added control of the spray wand and helps reduce fatigue.
TRIGGER WITH LOCK-OUT
Pulling the trigger releases a stream of water for high
pressure cleaning. The lock-out provides protection against
unauthorized use.
Page 9 — English

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido