7.6 Compliance with international standards
7.6.1 Voltage detector
(in accordance with IEC 61243-3 - 1998 edition)
7.6.2 Electromagnetic compatibility
In compliance with IEC 61243-3
7.6.3 Mechanical protection
Degree of protection provided by the enclosure
(in compliance with EN 60529 - Ed. 1992)
- IP 65 for the casing
- IP X0 for the test probes.
N.B. The casing is totally protected against dust penetration
and splashes of water.
Degree of protection against mechanical impacts
(in compliance with NF EN 50102, Ed. 1995): IK 04
7.7 Dimensions / Weight
196 x 68 x 45 mm / 400 g
8. TO ORDER
C.A 700 voltage detector .............................. P01.1917.27Z
Delivered with a black lead to the end of which a test probe
with a diameter of 1.9 mm is attached, 3 batteries of 1.5 V as
well as this operating manual.
C.A 700 installer's kit .................................. P01.1917.28
C.A 700 voltage detector in a carrying bag, comprising:
- one black lead with a test probe,
- one yellow lead with a yellow alligator clip firmly attached to
one end,
- one two-pole+earth adaptor along with its operaing
instructions,
- 3 batteries of 1.5 V as well as this operating manual.
Accessories and replacement parts
Carrying bag .................................................. P01.2980.48
Lead with alligator clip (yellow - IP2X) .......... P01.2951.50
Lead with test probe (black) .......................... P01.2951.92
Removable «test probe» adaptor .................. P01.1019.64
Removable «two-pole+earth» adaptor .......... P01.1019.63Z
9. GUARANTEE
Our guarantee is applicable for twelve months after the date
on which the equipment is made available (extract from our
General Conditions of Sale, available on request).
16
16