Adjust Calf Support; Use Canopy; Use Front Swivel Lock; Use Brake - Joie Aire Lite Manual De Instrucciones

Ocultar thumbs Ver también para Aire Lite:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 9

Adjust Calf Support

see images
-
17
18
There are two recline angles, 1-2
17
for adjustment.
To raise calf support, push the calf support from position 1 to position 2
To lower calf support, press the adjustment buttons on both sides of the calf
- 1
support
18
, and rotate the calf support downwards.

Use Canopy

see images
19
To open the canopy, pull canopy toward front.
19
To fold the canopy, pull canopy toward back.
19

Use Front Swivel Lock

see images
20
Pull up the front swivel locks to maintain the moving direction.
Tip
It is recommended to use swivel lock on uneven surfaces.

Use Brake

see images
21
To lock wheels, step on the brake lever as
21
Lift the brake lever to release wheels.
Tip
Always apply brake when stroller is in stopped position.

Adjust Handle

see images
22
Handle can be adjusted to 7 positions.
To adjust the handle, press the left and right handle adjustment buttons at the same time
- 2
handle to a desirable position.
22
13
17
- 2
18
20
- 1
22
, and rotate the

Fold Stroller

see images
23
-
24
Please fold the canopy before folding the stroller.
19
- 1
Push secondary lock
23
and squeeze one-hand-fold button
A click sound means the stroller is folded completely.

Use Accessory

Accessories may be sold separately or may not be available depending on region.
Use Armbar Cover
The armbar cover can be removed from the armbar. To assemble armbar cover in reverse steps.
Use Rain Cover
see images
25
To assemble the rain cover, place it over the stroller, and then attach the hook and loop fasteners on the rain
cover.
25
!
When using the rain cover, please always check its ventilation.
!
When not in use, please check that the rain cover has been cleaned and dried before folding.
!
Do not fold the stroller after assembling the rain cover.
!
Do not place your child into the stroller assembled with rain cover during hot weather.

Care and Maintenance

see images
26
1. Removable seat pad may be washed in cold water and drip-dried. No bleach.
2. To clean stroller frame, use only household soap and warm water. No bleach or detergent.
3. From time to time check your stroller for loose screws, worn parts, torn material or stitching. Replace or repair
the parts as needed.
4. Excessive exposure to sun or heat could cause fading or warping of parts.
5. If stroller becomes wet, open canopy and allow to dry thoroughly before storing.
6. If wheels squeak, use a light oil (e.g., WD-40, antirust oil, or sewing machine oil). It is important to get the oil
into the axle and wheel assembly.
26
7. If brake pedal stiff/hard to fully engage, flush any debris from brake system with clean water first before
lubricating.
8. When using your stroller at the beach or areas of high dust/sand, completely clean your stroller after use to
remove sand and salt from brake mechanisms and wheel assemblies.
- 2
23
Push the stroller forward to fold.
24
14

Publicidad

Tabla de contenido
loading

Tabla de contenido