CULUS Elica Guía De Instalación, Uso Y Mantenimiento página 21

11. First insert the lower section of the duct,
on which the threaded inserts can be
found.
Fix it to the frame, tightening the first and
fourth screws on both sides (counting
from the bottom).
12. Join the second
tightening the second and third screws on
each side (counting from the bottom).
Fix the 2 sections in place using 4 screws
(2 per side).
lower section by
13. Apply 2 casings (supplied) to cover the
fixing points on the lower duct sections
(CAUTION:
CASINGS ARE EASY TO RECOGNISE
BECAUSE THEY ARE NARROWER
AND LESS DEEP).
14. Check all light bulbs to make sure they
are secure in their sockets.
Turn power on in service panel.
Check lights and blower operation per
Care & Use section of this manual.
If range hood does not operate:
• Check that the circuit breaker is not
tripped or the house fuse blown.
• Disconnect power supply. Check that
wiring is correct.
To get the most efficient use from your
new range hood, read the "Use and Care
Information" section.
Keep your Installation Instructions and
Use and Care Guide close to range hood
for easy reference.
21
THE LOWER DUCT