Replacing The Light Bulb; Charcoal Filter - CULUS Elica Guía De Instalación, Uso Y Mantenimiento

Replacing the light bulb

Disconnect the hood from the electricity.
Warning! Prior to touching the light bulbs
ensure they are cooled down.
• Use a small screwdriver as a lever on the
borders of the lamp in order to remove
the lightbulb.
• Slide out the lightbulb to be replaced and
replace with a new 12V 20W MAX 30°
Ø35 12V GU4.
• Carry out the replacement and mount the
new lightbulb by following instructions in
the reverse.
If the lights do not work, make sure that the
lamps are fitted properly into their housings
before you call for technical assistance.

Charcoal Filter

It absorbs unpleasant odours caused by
cooking.
The charcoal filter can be washed once every
two months (or when the filter saturation
indication system – if envisaged on the
model in possession
necessity) using hot water and a suitable
detergent, or in a dishwasher at 65°C (if the
dishwasher is used, select the full cycle
function and leave dishes out).
Eliminate excess water without damaging the
filter, then put it in the oven for 10 minutes at
100° C to dry completely. Replace the
– indicates this
mattress every 3 years and when the cloth is
damaged.
Assembly
Place the mat around the grease filter and fix
it in place using the devices provided.
Position the upper cap and fix it in place
using the fixing pin.
To disassemble, perform the steps in the
reverse order.
25