Festina IFMCR60 Manual De Instrucciones página 31

[Split Time Measurement]
1. Each time the A button is pressed, the chronograph is switched between start
and stop.
2. Press the B button while the chronograph is measuring to display the split time
for about ten seconds. (The "SPL" indicator will flash while the split time is
displayed.) Each time the B button is pressed, the newest split time is displayed.
3. Press the B button to reset while the chronograph is stopped.
A
RESET
B
*1: After 10 seconds, automatically returns to the measuring display.
I F M C R 6 0
B
A
MEASURE STOP
*1 B
SPLIT TIME
58
I F M C R 6 0
[Switching the Mode During Chronograph Measuring]
Even if the M button is pressed and the mode is switched while the chronograph
is measuring, the measurement will continue.
When you return to the <CHR> mode, the measured time is again displayed.
Split time
Split time
Start
What is split time: Intermediate elapsed times from the start.
Goal
59