NEO Moving Torch Manual De Usuario página 10

Test mode
System information
Main menu
Through the buttons control the cursor,press "EN-
TER " button to enter setup.
Secondary menu
Secondary menu include of running mode, address
setting, language setting, advanced settings, sys-
tem setting, system information and so on.
1. Running mode, at the same time only can run
one mode, select the music mode or automat-
ic mode, press the "ENTER" button can also
choose different control mode like as music
mode or automatic mode effect. DMX mode,
at the same time for master-slave mode, if link
the DMX signal, it is DMX model, if is the mas-
ter signal, can be used as master -slave mode.
Auto mode,Auto mode at same time as master
mode. when open master-slave, slave mode as
DMX mode
2. Address setting, setting after need press
"enter" save address code, then back to main
P. 10
Neo Moving Torch - English version
Password
X axis horizontal
Motor (0-255)
Y axis vertical motor (0-255)
X axis adjust (0-255)
Y axis adjust (0-255)
Laser test pattern (test 0-3)
LED R 000~255
LED G 000~255
LED B 000~255
LED W 000~255
Address code
Running mode
On time (on the run time)
Run time (use of total time)
Serial number
Version information
Reset factory setting (ON/OFF)
menu. if u press "return" means no save ad-
dress code.
3. Language setting: menu language can setting
Chinese and English.
4. Advanced settings:
a. Motor setting:
• X axis horizontal invert (ON/OFF)
• Y axis vertical invert (ON/OFF)
• X axis running angle (360°/540°)
b. Laser setting :
• X axis invert (ON/OFF)
• Y axis invert (ON/OFF)
• X axis zoom (0-255)
• Y axis zoom( 0-255) whole zoom 0--255
c. System setting:
• master-slave setting (ON/OFF)
• Color setting (RGB/single color)
• scanner K(20k-40k)
• screen protect---can setting of off/on.
When off, after screen play,clean screen. after