NEO Moving Torch Manual De Usuario página 11

enter screen protect ,will display this mode.
• Screen rotating, can let screen upside down
180°. LOGO, display LOGO or not.
• Motor reset - Manual reset motor.
• Factory setting - please Parameter setting as
factory setting
5. Testing mode mode is a special mode,
only when into testing mode of display can use
it, return it, will back to before running mode.
when at testing mode can adjust X axis motor,
9. DMX-512 CHANNEL INTRODUCTIONS
27 CH MODE AS FOLLOWING
Channel
CH1 X motor
CH2
Fine-tuning
CH3
CH4
Fine-tuning
CH5 Motor speed
CH6 XY motor reset
Laser off
IPLAY mode
CH7
SDPLAY mode
CH8 Pattern choose
Value
0~255
X motor 0~255
Y motor 0~255
Y motor 0~255
0~255
0~255
0~31
32~47
48~63
64~79
80~95
96~159
160~175
176~239
240~255
0~255
X axis horizontal motor and Y axis vertical
motor of position and X axis correction and Y
axis correction laser test pattern,
System information Display. System informa-
6.
tion address code running mode, system now
at running mode. boot time (on the run time)
running time (use of total time) Serial number.
version information, currently used program
version.
Control function
X motor
X motor
Fine-tuning
Y motor
Y motor
Fine-tuning
XY motor speed choose
XY motor reset
Laser off
Silent control trigger - Manual selection pattern
Automatic
Music control trigger - Manual selection pattern
Music control trigger - Auto
Silent control trigger - Manual selection pattern
Silent control trigger - Auto effect
Music control trigger - Manual selection pattern
Music control trigger - Auto effect
Each 32 number value choose one pattern
P. 11
- Neo Moving Torch
English version