NEO Moving Torch Manual De Usuario página 15

10. WARNING
Maintenance should be performed every 15-day period, by using a sponge which is dipped with alcohol, rather
than wet cloth or other chemical liquid, to clean the mirror. Always disconnect from the mains when the device
is not in use or before cleaning it.
Power must be disconnected before maintenance or repair. Do not look at the light source directly.
Note Don't separate laser machine from laser power and repair them by yourself , otherwise no good repair
service will be supplied.
DECLARATION
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to en-
sure a safe operation, it is absolutely necessary forthe user to follow the safety instructions and warning notes
written in this user manual.
We cannot be made liable for damages caused by incorrect installations and unskilled operation!
11. PRODUCT COMMON BREAKDOWN COMPARATIVA CHART
Breakdown cause
The fixture no work
No sound control
The fixture can bright
normally, but it not
controlled by controller
Master-slave mode. The
master mode is normal, but
slave mode is not normal
The button malfunction.
does not work
The fixtur's brightness
obvious dim
Major breakdown analysis and solution
1. Check the power cable whether to connect the fixture, whether the fuse
does burn out.
2. Check the input voltage whether to assign the voltage match with the
fixture.
3. Check work order is normal reset or not.
1. Check the address code or the display whether establishes according to
the instruction booklet is the voice control pattern.
1. Please check the fixture's TFT outset address setting whether correctly.
2. Please check the XLR signal cable whether be damage.
1. Please conformed only one for the master and the master without DMX be
connected, and to set master as sound control or outo pattern.
2. Master-slave set as DMX mode.
1. Check the buttons whether to have some button not to have the normal
reset.
1. Check the LED tubes or the laser already whether to be service life.
2. Check the internal and external optical system whether to be clean.
P. 15
English Version - Neo Moving Torch