NEO Moving Torch Manual De Usuario página 5

3. INSTALLATION
1. Please check the voltage whether is the same
with the one showed on the equipment or not.
2. It must ask for the technical person and set the
light safety when installation. And let the light
beam at the suitable angle.
3. When install this equipment please make sure
there's no flammable surfaces (decorated
things, etc) within at least 2.5M and maintain
TFT setting
Mode
1
2
3
control mode (27CH)
4
Sound mode
Auto mode
DMX 512
SD mode
minimum distance of 0.5M from the equip-
ment to the walls.
4. Please make sure that there's no other equip-
ment or decorating materials obstructed the
exhaust fan and the vent-pipe.
5. Products should be install immobility.
6. In case of safety, it's very important that to
connect the earth with line.
TFT Display
P. 5
English version - Neo Moving Torch