Allmatic BEVK4 Manual De Instrucciones página 13

INVERSION OF DIRECTION OF OPENING
Version BEVK4
Check the direction of the descent of the rod; if necessary inverse the direction (pictures 1 and 2), follow this
procedure:
1. Loosen and release the spring
2. Unscrew the bolt indicated by the white arrow (Pictures 1 and 2) and by unlocking the motor, manually
turn the arm till it reaches the opposite position.
3. Lock the motor and screw the bolt in the opposite direction.
Version BEVK6
Check the direction of the descent of the rod; if necessary inverse the direction (pictures 3 and 4), follow this
procedure::
1. Loosen and release both springs
2. Unscrew the three bolts indicated by the arrows (pictures 3 and 4) and by unlocking the motor, manually
turn the arm till it reaches the opposite position.
3. Lock the motor and screw the bolts in the holes indicated in picture 3 and 4 assuring that the longer th-
read is near to the central pivot, black arrow, and reconnect the springs.
4. Check that the external clump hub is in vertical position with relaxed springs, on the contrary unscrew
the two screws indicated in the picture 6 and turn the external clamp hub bringing it to the vertical posi-
tion picture 5.
Direction of closing
Picture 3
BALANCING
Install and uninstall the rod only in vertical position
After having installed the rod of the motor and paying attention, manually move the rod, the correct balan-
cing enables the rod keep itself at 45° without any support.
WARNING: the adjustment of the spring tensioner has to be performed only with the rod in vertical position.
If the rod leans to the closing position it is necessary to screw the spring tensioner.
If the rod leans to the opening position it is necessary to unscrew the spring tensioners.
If you do not manage to balance the rod, it is necessary to change the anchor holes of the spring tensors
bolts: more internal if the rod is too light or more external if it is too heavy.
This product is composed of various components which may in turn contain pollutants.
Do not dispose of it in the environment! Find out about the method for recycling or dis-
posing of the product in compliance with current local laws
Direction of closing
Picture 1
Picture 4
DISPOSAL
13
Picture 2
Picture 5 Picture 6