Initial Setting - Solo 130 Manual Del Usario

Carburetor setting data
he following instructions are intended for
Service Personnel!

Initial setting:

Completely screw in the L screw (L) and H screw
(H). Then turn to the recommended initial
setting.
L = 1 turn out
H = 1 turn out
Idle speed
Brushcutter 130 = 2900
Brushcutter 134 = 2900
Brushcutter 140 = 2900
Maximum permitted speed (with blade)
Brushcutter 130 = 9500
Brushcutter 134 = 9500
Brushcutter 140 = 9500
Caution! Due to potential engine
damage, do not set maximum RPM
higher than recommended!
Brushcutter
Engine
3
Capacity cm
Max. capacity with RPM per ISO 8893 kW/min
Max. RPM unloaded w/ brushcutter min
Gasoline tank amount
Carburetor
Gasoline
Air filter
Ignition
Gear head ratio
Noise level in work area dB (A)
Sound capacity level per ISO 9207 db(A)
measured/garanted
Weighted acceleration value
right handle/left handle m/s
Weight without cutters kg (lbs)
1
/min. (R.P.M.)
1
/min. (R.P.M.)
1
/min. (R.P.M.)
1
/min. (R.P.M.)
1
/min. (R.P.M.)
1
/min. (R.P.M.)
-1
-1
liter
2
130
one-cylinder two-cycle engine
30
1.4/ 9000
9500
0.6
Diaphragm carburetor with easy-start Primer-system
Gasline-oil-mixture
Foam filter
Electronic ignition
1.23 : 1
String Head 89.8
Cutting Blade 88.7
108,5/110
String Head 3.5 / 2.0
Cutting Blade 3.9 / 2.4
6,8 (15)
27