Descargar Imprimir esta página

Automatic Flash Mode - Metz MECABLITZ 34 CS-2 Instrucciones Del Manejo

Ocultar thumbs Ver también para MECABLITZ 34 CS-2:

Publicidad

70

Automatic flash mode

Modo flash Auto
Funcionamiento Automático
Fig. 4
Fig. 4
Fig. 4
In the auto flash mode, the flash unit's sensor
measures the light reflected from the subject. The
flash is cut off as soon as sufficient light has been
emitted for correct exposure.
This eliminates the need to recalculate and readjust the
aperture each time the shooting distance is changed, pro-
vided that the subject remains within the indicated auto
flash range.
Setting procedure for automatic mode (fig. 4):
Example: Flash-to-subject distance 5 m
Film speed ISO 100/21°
Taking into account the maximum effective range
flash-to-subject distance of 5m (see table at the back of
the unit) permits the use of the auto-working apertures f/4
or f/2
. The maximum range with an auto-working aper-
ture of f/4 is 7 m, and with f/2 up to 14 m. The minimum
lighting distance is approx. 10% of the maximum effective
range.
The subject should be in the middle third of the
distance range. This gives the electronics suffi-
cient leeway for compensation should this prove
to be necessary.
, a

Publicidad

Capítulos

loading