Stitch Length; Cutting Width - ELNA 683 Manual De Instrucciones

Stitch Length

The fabric weight and fiber content may
require the SL (stitch length) to be
adjusted. Stitch length should be set
between 0.5 and 4.0. Set a shorter stitch
length for lightweight or sheer fabrics. Set
a longer stitch length for heavyweight or
bulky fabrics.

Cutting Width

The stitch, the fabric weight and the number of
fabric layers may require the cutting width dial
to be adjusted. Fabric should lie flat inside the
overlock stitch without loops or tunneling.
Loops
The cutting width is set narrower than the stitch
width. Move the cutting blades to the right by
turning the cutting width dial up to a higher
number (counter-clockwise).
Tunneling
The cutting width is set wider than the stitch
width. Move the cutting blades to the left by
turning the cutting width dial down to a lower
number (clockwise).
63