Assembly And Adjustments - Black and Decker BCD701 Manual De Instrucciones

ASSEMBLY AND ADJUSTMENTS


WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can cause injury.

WARNING: Laceration Hazard. Before attempting any
of the following operations, make sure that the tool is
switched off and the battery is removed, and that the
saw blade has stopped. Used saw blades can be hot.

WARNING: Remove battery when removing or
installing the blade
Fitting the saw blade (Fig. A, F)
1. Hold the saw blade
5
facing forward.
2. Push the locking lever
3. With the teeth facing forward, insert the shank of the
saw blade into the blade holder
4. Release the lever.
5. Pull blade to be sure the blade is fully secured.
Fig. F
3
OPERATION

WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can cause injury.

WARNING: To reduce the risk of injury, never use the
tool when the saw shoe is loose or removed.
Installing and Removing the GoPak 2 in 1
Battery in a Power Tool (Fig. G)

WARNING: Remove any connected USB cords from
the BLACK+DECKER GoPak 2 in 1 battery before
connecting the GoPak to the compatible tool.
1. Remove the tool terminal cap if installed on the
BLACK+DECKER GoPak 2 in 1 battery.
2. To power a compatible GoPak 12V MAX* power tool,
align the tool terminals on the foot of the tool with the
terminal slots on the battery
nOTE: The state of charge indicator will face the rear of
the tool and the USB ports will face the front. The arrow on
as shown, with teeth
3 up away from the shoe
as far as it will go.
18
18
4
as shown in Fig. G.
6
the battery will align with the arrow on the tool as shown
in Fig. G.
3. Snap the BLACK+DECKER GoPak 2 in 1 battery into the
foot of the tool. The arrow
with the arrow
fully seated and fully latched into position before using.
4. To remove the BLACK+DECKER GoPak 2 in 1
battery from the tool, depress the two battery
release buttons
BLACK+DECKER GoPak 2 in 1 battery off the tool.
nOTE: The BLACK+DECKER GoPak 2 in 1 battery USB ports
are disabled when the trigger is pulled.
Fig. G
17
16
4 .
6
Using the GoPak 2 in 1 battery to
charge your USB device (Fig. H)
1. Plug the USB A end of your device specific cable
into the BLACK+DECKER GoPak 2 in 1 battery
and the other end of the cable into a UL or CSA listed
compatible device (Phone/Tablet/MP3/Wearable/Game
Controller/etc.). Charging will start automatically.
Fig. H
Functionality
The BLACK+DECKER GoPak 2 in 1 battery can power your
compatible BLACK+DECKER 12 V GoPak MAX* tools or
power/charge your mobile devices. The compact, slim
battery housing is designed for portability.
GoPak Charge Input: Up to 2.4A**
-
- GoPak Power Output: Up to 2.4A***
** Actual input charge rate is dependant upon power
adapter (not included).
***Actual output rate is dependant on the device.
on the battery will align
16
on the tool. Ensure the battery is
17
7 located on the tool and pull the
14
English
7
14
11
11
7