Hourcounter - Columbus AKS 70 BM 62 Manual De Instrucciones

Vacuum sweeper
AKS 70|BM 62
1) Gear switch
2) Electric switchboard check led
3) Filter Buzzer Button
4) Acoustic Indicator Button
5) Brushes motor switch
6) Ignition key
7) Working light switch (optional)
8) Charge indicator
9) Hour counter
GEAR SWITCH :
Part. 1 The purpose of the gear switch lever is to move the machine forward or reverse. When the switch is in forward position (arrow
pointing up) by pressing the pedal Part. 3 Fig. 10 the machine moves forward. When the switch lever is in reverse position (arrow pointing
down) by pressing the pedal the machine moves reverse. For safety reasons, the reverse speed is very low. If the switch is left in central
position, the machine moves neither forward nor in reverse.
ELECTRIC SWITCHBOARD CHECK LED:
Part. 2 This red led must be always switched on during functioning. If this led should flash at regular intervals there could be technical
problems within the machine. In this case you are adviced to immediately contact assistance to check the motorsweeper.
FILTER BUZZER BUTTON:
Part. 3 This buzzer cleans the suction filters through a motor-vibrator Part. 2 Fig. 5; it must be pressed at least 6 / 7 times for 8 / 10 seconds
each (operation to be performed before starting work, before emptying the bin and with the motor off); to perform this operation with motor
running, close the suction by pulling the knob Part. 1 Fig. 6.
ACOUSTIC INDICATOR BUTTON:
Part. 4 By pressing this button the acoustic indicator switches on.
BRUSHES MOTOR SWITCH:
Part. 5 By actioning this switch either central and side brushes are activated.
IGNITION KEY :
Part. 6 It activates the switchboard and in particular the movement potentiometer. It is therefore possible to move the machine without have
it working.
WORKING LIGHT SWITCH: Optional
Part. 7. It activates the adjustable working light.
CHARGE INDICATOR:
Part. 8 It indicates the charge level of batteries and it's represented by three coloured lights (red, yellow and green); by turning on the ignition
key Part. 6 they switch on in the following order: red-yellow-green; wait until green light is on before forwarding or reversing. If red light
should switch on batteries need recharging.
___________________________________________________________________________________________________________
IT IS RECOMMENDED NOT TO WAIT UNTIL THE RED LIGHT TURNS ON TO PROCEED WITH RECHARGING OF BATTERIES BUT TO
PROCEED WITH THE OPERATION AS SOON AS YELLOW LIGHT SWITCHES ON.
__________________________________________________________________________________________________________

HOURCOUNTER:

Part. 9 Makes visible the number of hours worked by the machine.
STANDARD FEATURES AKS 70|BM 62
24